Low-Complexity Spoofing Mitigation
December 1, 2011 By: Saeed Daneshmand, Ali Jafarnia-Jahromi, Ali Broumandan, Gérard Lachapelle GPS World
Most anti-spoofing techniques are computationally complicated or limited to a specific spoofing scenario. A new approach uses a two-antenna array to steer a null toward the direction of the spoofing signals, taking advantage of the spatial filtering and the periodicity of the authentic and spoofing signals. It requires neither antenna-array calibration nor a spoofing detection block, and can be employed as an inline anti-spoofing module at the input of conventional GPS receivers.
GNSS signals are highly vulnerable to in-band interference such as jamming and spoofing. Spoofing is an intentional interfering signal that aims to coerce GNSS receivers into generating false position/navigation solutions. A spoofing attack is, potentially, significantly more hazardous than jamming since the target receiver is not aware of this threat. In recent years, implementation of software receiver-based spoofers has become feasible due to rapid advances with software-defined radio (SDR) technology. Therefore, spoofing countermeasures have attracted significant interest in the GNSS community.
Most of the recently proposed anti-spoofing techniques focus on spoofing detection rather than on spoofing mitigation. Furthermore, most of these techniques are either restricted to specific spoofing scenarios or impose high computational complexity on receiver operation.
Due to the logistical limitations, spoofing transmitters often transmit several pseudorandom noise codes (PRNs) from the same antenna, while the authentic PRNs are transmitted from different satellites from different directions. This scenario is shown in Figure 1. In addition, to provide an effective spoofing attack, the individual spoofing PRNs should be as powerful as their authentic peers. Therefore, overall spatial energy of the spoofing signals, which is coming from one direction, is higher than other incident signals. Based on this common feature of the spoofing signals, we propose an effective null-steering approach to set up a countermeasure against spoofing attacks. This method employs a low-complexity processing technique to simultaneously de-spread the different incident signals and extract their spatial energy. Afterwards, a null is steered toward the direction where signals with the highest amount of energy impinge on the double-antenna array. One of the benefits of this method is that it does not require array calibration or the knowledge of the array configuration, which are the main limitations of antenna-array processing techniques.
Figure 1. Proposed anti-spoofing module.
Processing Method
The block diagram of the proposed method is shown in Figure 2. Without loss of generality, assume that s(t) is the received spoofing signal at the first antenna.
Figure 2. Operational block diagram of proposed technique.
The impinging signal at the second antenna can be modeled by 
, where θs and μ signify the spatial phase and gain difference between the two channels, respectively. As mentioned before, the spoofer transmits several PRNs from the same direction while the authentic signals are transmitted from different directions. Therefore, θs is the same for all the spoofing signals. However, the incident authentic signals impose different spatial phase differences. In other words, the dominant spatial energy is coming from the spoofing direction. Thus, by multiplying the conjugate of the first channel signals to that of the second channel and then applying a summation over N samples, θs can be estimated as
(1)
1 2 3
RSS
Become a Fan
Join our Network
Follow Us
Please send any technical comments or questions to our webmaster.