In 2011 the European GNSS Agency (GSA) awarded GMV the EEGS2 project (EGNOS Extension to Eastern Europe). The main objective of the project is to demonstrate through flight trials the benefits of the European Geostationary Navigation Overlay Service (EGNOS) in areas of Eastern Europe where it is not yet available, such as Poland, Romania, Ukraine, Moldova and Russia, and to prepare the civil aviation authorities and air navigation service providers for future use of the system.

GMV’s magicSBAS solution.

In the context of this project, after the tests conducted in Spain, the maiden flights have been successfully carried out in Moldova, using the equipment and tools developed by GMV. The Moldova demonstrations have given pilots and service providers a clear idea of the potential benefits of EGNOS and the flying procedures of the near future, GMV said.

Four flights had previously been conducted in Spain in November, December and February. The satisfactory results of these flights then paved the way for the demonstrations in Moldova.

The magicLPV system, developed under this project, enables LPV approaches (localizer performance with vertical guidance) to be carried out using the signal generated by the magicSBAS application. This test environment allows any region of the world to analyze the air-navigation benefits to be obtained with deployment of a Space Based Augmentation System (SBAS). This signal is read by Internet and transmitted by radio frequency in the vicinity of the airport, allowing LPV approaches to be made in places where SBAS is either completely unavailable or available only on a very limited basis.

Eight flights in all were carried out in various Moldovan airports, including Chișinău International Airport. Test results were highly satisfactory, demonstrating the simplicity of equipment configuration and operation, and the performance of the magicSBAS signal, GMV said.

“These trials are an important milestone for GMV, for the project and, fundamentally, for the use of EGNOS in the countries of Eastern Europe in the near future,” said Miguel Romay, executive director of GNSS–Aerospace.

GMV will continue with these demonstrations in other countries of Eastern Europe. The next trip in two weeks will be to Romania, where new flights are expected to be just as successful.

ION GNSS+ 2013 is the 26^th International Technical Meeting of the ION Satellite Division and the world’s largest technical meeting and showcase of GNSS technology, products and services.

ION GNSS+ brings together international leaders in GNSS and related positioning, navigation and timing fields to present new research, introduce new technologies, update current policy, demonstrate products and exchange ideas. The addition of “+” to the conference name reflects the growing emphasis on GNSS and the rapidly evolving field of alternative navigation methods.

This year’s conference will feature pre-conference tutorials September 16-17, policy and panel discussions, commercial and applications oriented sessions, and more than 250 technical papers on a diverse array of topics including:

• Advanced Inertial Sensing and Applications
• Advances in Military GNSS Systems and Applications
• Algorithms and Methods
• Alternatives and Backups to GNSS
• Aviation Applications
• Clock/Timing and Scientific Applications
• Emerging GNSS (Galileo, COMPASS, QZSS, IRNSS) (both a Panel Discussion and a technical session)
• Future PNT and Its Applications
• Geodesy, Surveying and RTK for Civil Applications
• GNSS Algorithms and Methods
• GNSS and the Atmosphere
• GNSS Compatibility, Interoperability, and Interchangeability
• GNSS Ground Based Augmentation Systems (GBAS)
• GNSS Simulation and Testing
• GNSS Space Based Augmentation Systems (SBAS)
• GNSS-MEMS Integration
• GNSS Program Updates (Panel Discussion)
• GPS and GLONASS Modernization
• High Integrity Systems (Panel Discussion)
• Indoor Navigation and Timing
• Interference and Spectrum Issues
• IP Policies Related to GNSS (Panel Discussion)
• Land Based Applications
• Marine Navigation and Applications
• Multi-Constellation/Portable Navigation Devices
• Multi-Sensor and Integrated Navigation in GNSS-Challenged Environments
• New Products and Commercial Services (both a Panel Discussion and a commercial applications oriented session)
• Next Generation GNSS Integrity
• Non Traditional PNT Applications
• Portable Navigation Devices
• Precise Point Positioning
• Receiver/Antenna Technology
• Remote Sensing with GNSS and Integrated Systems
• Safety Critical Applications
• Software Receivers
• Space Applications
• Standalone GNSS Services in Challenging Environments
• Timing and Scientific Applications
• Unmanned GNSS (Panel Discussion)
• Urban Navigation Technology

New this year will be two For Official Use Only (FOUO) U.S. only sessions: Multi-Sensor Integrated Navigation and Networked-Related Navigation. These sessions are sponsored by the ION’s Military Division and The MITRE Corporation.

“We know that most GPS watches on the market are too bulky and complicated to use while training,” said Corinne Vigreux, managing director, TomTom Consumer. “Just as we developed easy-to-use navigation products that changed the way that people move from A to B, we have developed a range of ultra-slim GPS sport watches that are far more comfortable to wear and far easier to use. Runners and multi-sport athletes can now view their performance information at-a-glance, making it easier to achieve their fitness goals.”

The new TomTom watches feature an extra-large, high-resolution and high-contrast display that makes it easy for runners and multi-sport enthusiasts to quickly see their distance, time and pace while they workout even in bright sunshine, TomTom said.

The new watches feature TomTom’s Graphical Training Partner. Easy-to-read full-screen graphics help users get the most out of their workouts. They can view their real-time performance at-a-glance with three graphical training modes:

Race: Race against a personal best or most recent run. Quickly track performance with real-time graphics, to continue to improve run-after-run.
Goal: Set a distance, time or calorie goal and see progress toward that goal with simple, full-screen graphics and alerts.
Zone: Set a target for pace or heart-rate (with optional heart-rate monitor) and track progress in a simple full-screen graph throughout a workout.

The new TomTom range includes an intuitive one-button control that enables users to easily navigate up-down-left-right through menus to access key stats and watch features, the company said. Unlike the majority of existing GPS watches on the market that feature multiple small and hard-to-operate buttons, the one-button control is easy to operate while moving and can be easily controlled in all weather conditions and while wearing gloves.

In addition to their ability to deliver at-a-glance performance information, the TomTom Runner and TomTom Multi-Sport include advanced features designed to address the needs of runners and multi-sport enthusiasts alike:

Ultra-slim design: At just 11.5mm, the slim design of the watch module comfortably fits men and women, and all wrist sizes.
Indoor tracker: Accurately track indoor runs using built-in sensors to count strides, so that users can monitor pace and distance even while running on a treadmill.
QuickGPSFix: Get started faster by using the latest in GPS and GLONASS satellite technology to quickly find their precise location.
Multi-platform compatibility: Sync, analyze and share stats on popular running sites and community platforms, including the TomTom MySports website, MapMyFitness, RunKeeper, TrainingPeaks and MyFitnessPal.
Super-tough display: Scratch- and impact-resistant glass stays easy-to-read, workout after workout.
Weather- and waterproof: Waterproof up to 50 meters/5ATM.
Long-lasting battery: Up to 10-hour battery life (GPS mode).
Bluetooth smart: Connect to sensors using the latest wireless technology.
Heart rate monitor: Use the Bluetooth Smart Heart Rate Monitor to track training zone for weight control, performance or speed.

TomTom Multi-Sport includes all the features included in TomTom Runner, and also allows multi-sport athletes to track their distance, time, speed and other key metrics when they cycle or swim. The TomTom Multi-Sport is also enhanced with the following features and options:

Dedicated bike mount: Easily see key stats at-a-glance with the specially designed bike mount.
Cadence sensor: Track cadence, speed and distance, indoors and out.
Built-in altimeter: Accurately track elevation, ascent, descent and grade with the built-in barometric altimeter.
Swimming motion sensor: Check detailed swim metrics such as laps, strokes, time and speed, and calculate a SWOLF score to show swim efficiency.

The TomTom Runner and TomTom Multi-Sport will be available in Summer 2013.

TomTom has also launched its new navigation engine, NavKit.

“Where navigation used to be about getting people to unfamiliar destinations, we are now empowering drivers with easy access to the information they need to make the smartest driving decisions, every day,” said Corinne Vigreux, managing director of TomTom Consumer. “We have completely redesigned the PND to become an essential daily driving tool. By providing easy access to our world class TomTom Traffic and enabling drivers to see more than just the road ahead, drivers will feel on top of their journey like never before.”

Drivers can easily access the travel information they need via a high-resolution, capacitive touchscreen, TomTom said. A new Interactive Map responds and scales to touch. Drivers can  zoom in and out to find and explore places on the map with their fingertips and tap on the map to get an instant route to a destination.

New NavKit Engine

TomTom’s navigation engine, NavKit, will power all future TomTom navigation products and be available for licensing to automotive and enterprise customers. The configurable component architecture has been designed to enable rapid integration. NavKit has programming interfaces for adding a customised user interface, porting to any operating system and integrating navigation services. As a result, the development of a connected navigation system on any device platform becomes far quicker and simpler, TomTom said.

The new NavKit engine incorporates all the navigation logic of an on-board turn-by-turn navigation application. Every element has been enhanced to deliver an improved user experience including route planning, free text search, 2D map browsing and 3D guidance view, map-matched positioning and real-time guidance, TomTom said.

“The automotive industry’s next challenge is to create a seamless connected car experience,” said Harold Goddijn, CEO at TomTom. “To help our customers achieve this, we created NavKit, a flexible, future-proof navigation platform. NavKit makes the creation of connected navigation solutions easier and faster than ever before.”

NavKit’s architecture will allow customers and industry partners to replace components in a modular way. Its new routing engine achieves faster and more accurate dynamic routing, both on TomTom’s maps and on Navigation Data Standard (NDS) maps. Additionally, it provides better routes around traffic and fully supports TomTom Traffic, Version 6.0, including incident duration predictions and jam tail warnings. The new free text search engine provides easier and faster address and POI search. A new map visualization engine greatly improves 2D map browsing and introduces a 3D guidance view.

TomTom GO Features

The new TomTom GO series also comes with Lifetime TomTom Traffic. TomTom’s world-class traffic information pinpoints exactly where delays start and end, helping drivers to get to their destinations faster. Drivers can choose to connect to TomTom Traffic in one of two ways, either via Smartphone Connected or Always Connected. Smartphone Connected devices are ready to receive TomTom Traffic by connecting to a smartphone via Bluetooth. Smartphone Connected uses an existing smartphone data plan to access TomTom Traffic, as well as other services like TomTom Speed Cameras.

Always Connected devices offer the simplest way to receive TomTom Traffic straight out of the box, TomTom said. With connectivity built-in and with no additional costs for roaming, drivers can access TomTom Traffic and other services, including TomTom Speed Cameras.

3D Maps bring buildings and landmarks to life so that drivers always know exactly where they are.

The new TomTom GO range has a simplified product line-up. Customers can select their preferred screen size, choosing from a 4.3″, 5″ or 6″ model; then decide how they prefer to receive their TomTom Traffic information, either via Smartphone Connected or Always Connected.

Additional TomTom GO Features

Route Bar: Essential traffic and travel information at a glance. The Route Bar shows precise traffic and speed camera information on the road ahead.

Quick Search: Drivers can find their destination faster with intuitive search results. Quick Search starts finding destinations as soon as the driver starts typing.

My Places: Drivers can see their favourite locations on the map and personalise their map with My Places. This makes it easier to find and navigate to favourite locations again and again.

Lifetime Maps: Always drive with the latest map. For the life of the product, drivers can download four or more full updates of the map onto the device, every year. Drivers receive all updates to the road network, addresses and Points of Interest.

Speed Cameras (three month trial): Drivers can drive in a more relaxed way, receiving alerts for speed cameras ahead. These timely warnings increase drivers’ awareness of local speed limits and help to save money on speeding fines. As part of TomTom’s global driving community, drivers will benefit from an advanced and highly accurate warning service.

The app, called VRPETERS (Vehicle Rollover Prevention Education Training Emergency Reporting System), uses sensors and GPS capability built into smartphones that can detect rollovers. Once the app detects a rollover, it sends an automatic emergency e-mail and phone message with the coordinates of the accident location to family or emergency responders.

“The tractor is the main power source for field operations, and tractor rollover accidents have been killing people since the beginning of their use in agricultural production,” said Bulent Koc, assistant professor of agricultural systems management at MU and developer of the app. “More and more farmers are using their smartphones to monitor weather or calculate production inputs while operating machinery. Since they already have their phones with them, installing VRPETERS could help save lives.”

Data from the NIOSH show that one out of every 10 tractor operators will roll a tractor at least once. NIOSH also notes that only half of the 4.7 million tractors on U.S. farms have rollover protection. In order to minimize false alarm rollovers on the app, Koc and his research assistant Bo Liu designed a device that must be attached to the tractor. This device helps calculate the stability characteristics of the tractor and will provide a warning to the driver when the tractor approaches its rollover point.

“Many farmers think they can jump out of their tractors in the event of a rollover, but this isn’t the case usually,” Koc said. “Side rollovers can occur in just three-quarters of a second and most people need a second or more to react to an event. So, VRPETERS can benefit farmers when a rollover occurs because they often can’t reach their phones to make an emergency call.”

VRPETERS can benefit more than just farmers, as the app also can be used on construction vehicles, trucks, snowmobiles, military vehicles, riding lawnmowers and all-terrain vehicles.

In addition to the rollover device installed on tractors and other dangerous equipment, Koc and Liu designed another device that can be used with VRPETERS. This device can be installed on vehicles and can be used as a backup to stream data to a smartphone or tablet. “With this additional device, parents or fleet managers can obtain real time data on how machines are being used,” Koc said. “If the device detects improper operation, an intervention can occur before an accident happens.”

Initial testing of VRPETERS was done using a remote-controlled model tractor. Once fully tested on a standard tractor, Koc and Liu will look for an industry partner to market the app.

“We kept the design of the enhanced SPAN-CPT identical to our legacy product to ensure a seamless upgrade process for our customers who would like to take advantage of the improved positioning capabilities,” said Jason Hamilton, NovAtel director of marketing. “The enhanced SPAN-CPT is fully backwards compatible with the previous generation of product. It retains the same compact form factor with identical pin-out and log structure.”

As with the previous generation product, the upgraded SPAN-CPT integrates NovAtel’s precision receiver technology with fiber optic gyro and MEMS accelerometer inertial components from KVH Industries in one compact unit. The tight-coupling of the GNSS and INS technologies optimizes the raw GNSS and IMU data, delivering a superior position, velocity and attitude solution, NovAtel said. Comprised entirely of commercial components, the SPAN-CPT minimizes the operational complexities of working across international boundaries.

Production of the OEM6 supported SPAN-CPT begins June 1.

Spatial Dual contains the Trimble BD982 GNSS receiver, which is a triple frequency dual-antenna RTK GNSS receiver. Using dual-frequency moving baseline RTK, Spatial Dual is able to provide heading accuracy of less than 0.1 degrees using its dual antennas. The dual-antenna heading works while both stationary and moving and allows for very accurate heading in both slow moving and 3D vehicles, where equivalent single antenna systems must rely on magnetic heading. An additional benefit of the dual antennas is the ability to measure slip angle to within 0.2 degrees.

Spatial Dual supports all of the current and future satellite systems, including GPS, GLONASS, Galileo and BeiDou. In addition, Spatial Dual supports RTK for centimeter positional accuracy and the recent Omnistar G2 network for 10 centimeter accuracy.

Spatial Dual provides position, velocity and orientation at rates up to 1000 Hz for highly dynamic applications. When Spatial Dual loses a GNSS fix it continues to navigate using dead reckoning inertial navigation to provide seamless navigation data through tunnels and other outage situations.

Spatial Dual is housed in a precision marine-grade aluminum enclosure that is waterproof and dirtproof to the IP67 standard and shockproof to 2000g, allowing it to be used in tough conditions.

Spatial Dual supports a wide range of peripherals including odometers and wheel speed sensors for ground vehicle navigation, DVLs and USBLs for underwater navigation and many other external sensors. It supports both industry standard NMEA output and an efficient binary protocol.

Firmware v0206 offers:

• Stabilized raw data output for output rates up to 10 Hz
• Extended $POUTC NMEA message, including current LEAP SECONDS value, flags for expected UTC correction, and PPS edge shift relative to UTC (sawtooth correction SW).
• Stabilized sleep mode operation ($POPWR,1111*66) for all NV08C series HW versions
• Increased position accuracy and stability in urban canyon conditions with poor SV visibility
• Cold start initialized to LEAP SECOND 16 (LEAP SECOND 16 came into effect July 1, 2012)

Benefits include:

• Obtain initial receiver coordinates more quickly, in cold starts, low satellite signal (foliage/canopy) and loss of satellite signal conditions (indoor, garages, tunnels…).
• Greater satellite tracking reliability in poor visibility conditions (urban canyon/tall buildings, bridges/underpasses…).
• Stable raw data output up to 10Hz rate.
• Full sleep mode support for effective power savings.
• Complies with ERA-GLONASS requirements.